HP T9576G06 Management Manual Download Page 716

Page: 716 / 778

SCF Error Messages for the NonStop Agent

SNMP Configuration and Management Manual — 424777-006

B- 6

SNMP Error 00007

SNMP Error 00007

Cause.

The NonStop agent could not update the SNMPCTL file with the configuration

change you submitted.

Effect.

The command is executed, but the SNMPCTL file no longer reflects the current

environment.

Recovery.

Check the event log to find out the corresponding file system error number.

Then refer to the

Guardian Procedure Errors and Messages Manual

for a description of

file system errors and possible recovery actions.

SNMP Error 00009

Cause.

You tried to define an invalid dotted-decimal format Internet address for the

HOSTADDR attribute.

Effect.

The ADD or ALTER command is not executed.

Recovery.

Redefine the object and specify a valid Internet address. For information on

specifying Internet addresses, see the

TCP/IP Configuration and Management Manual

SNMP W00007 Unable to update SNMPCTL file.

SNMP E00009 Internet address invalid

Summary of Contents for T9576G06











































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for T9576G06

Reviews:

Related manuals for T9576G06

Brands by name

Popular brands

HP T9576G06, Management Manual

Search results

Summary of Contents for T9576G06

Reviews:

Related manuals for T9576G06

Brands by name

Popular brands