The server reboots automatically after the installation is complete. Remove the DVD from the
USB DVD drive.
7.
The Configuration Wizard starts automatically. Use the appropriate configuration procedure:
•
To configure a file serving node, select one of the following:
◦
When your cluster was configured initially, the installer may have created a template
for configuring file serving nodes. To use this template to configure the file serving
node undergoing recovery, go to
“Configuring a file serving node using the original
template” (page 126)
.
◦
To configure the file serving node manually, without the template, go to
“Configuring
a file serving node manually” (page 131)
.
•
To configure the dedicated Management Server blade, go to
“Configuring the management
console on the dedicated (non-agile) Management Server blade” (page 139)
. This procedure
is intended for systems that are not using the agile management console configuration,
and instead, the standard management console is configured on the Management Server
blade.
NOTE:
You will need your latest
fmbackup.zip
file to restore the cluster configuration
on the dedicated (non-agile) Management Server blade. (See
“Backing up the management
console configuration” (page 42)
for more information.) If you do not have an
fmbackup.zip
file, full recovery may not be possible.
Configuring a file serving node
Configuring a file serving node using the original template
Complete the following steps:
126
Recovering the X9720 Network Storage System
