Step 4—Cable the X9700c to SAS switches
Using the two 4-meter cables, cable the X9700c to the SAS switch ports in the c-Class Blade
Enclosure, as shown in the following illustrations for cabling the base or expansion cabinet.
Base cabinet
Callouts 1 through 3 indicate additional X9700c components.
X9700c 4
1
X9700c 3
2
X9700c 2
3
X9700c 1
4
SAS switch ports 1 through 4 (in interconnect bay 3 of the c-Class Blade Enclosure). Ports 2 through 4 are
used by additional capacity blocks.
5
Reserved for expansion cabinet use.
6
SAS switch ports 1 through 4 (in interconnect bay 4 of the c-Class Blade Enclosure). Ports 2 through 4 are
used by additional capacity blocks.
7
Reserved for expansion cabinet use.
8
86
Upgrading the X9720 Network Storage System hardware
