HP StorageWorks MSL2024, User'S And Service Manual

Page: 188 / 276

Details and solution Description Error code
• Early firmware versions were not able to
use as much force to get or place media
in a magazine. Upgrading the Library
firmware might resolve this issue.
• If the error consistently happens on the
same slot, try different tape cartridges in
that slot.
• If the failure remains with the same
slot, the magazine may be at fault.
• If the failure follows the tape cart-
ridge, the tape cartridge may be at
fault.
• If the device is performing an operation
that automatically returns a tape cartridge
to a certain slot, make sure another tape
is not loaded in that slot.
• Run the wellness test
Ends of slider
2
movement not in expected
range
8F
• Remove all magazines and look for any
obstructions to the robot.
• Run the wellness test.
Ends of elevator
3
movement not in expected
range
90
• Remove all magazines and look for any
obstructions to the robot.
• Run the wellness test.
Ends of rotation
4
movement not in expected
range
91
• Remove all magazines and look for any
obstructions to the robot.
• Run the wellness test.
Ends of sled
5
movement not in expected
range
92
• Remove all magazines and look for any
obstructions to the robot.
• Run the wellness test.
Gripper
1
reached a position beyond
expected range
93
Slider
2
reached a position beyond expected
range
94
Elevator
3
reached a position beyond
expected range
95
Rotation
4
reached a position beyond
expected range
96
Sled
5
reached a position beyond expected
range
97
• Power cycle the device and retry the op-
eration.
Cartridge present sensor not found 98
Slider
2
home sensor not found
99
Rotation
4
home sensor not found
9A
Troubleshooting 188