HP StorageWorks MSL2024, User'S And Service Manual

Page: 46 / 276

WARNING!
The HP StorageWorks MSL2024 Tape Library weighs up to 15.6 kg (34.3 lb) without media and up
to 20.4 kg (44.9 lb) with media (24 cartridges). The MSL4048 Tape Library weighs up to 24.6 kg
(54.1 lb) without media and up to 34.2 kg (75.2 lb) with media (48 cartridges). The MSL8048 Tape
Library weighs up to 46.6 kg (102.7 lb) without media and up to 66.5 kg (151.7 lb) with media (48
cartridges). The MSL8096 Tape Library weighs up to 46.6 kg (102.7 lb) without media and up to
68.8 kg (151.7 lb) with media (96 cartridges).
When moving the Library, to reduce the risk of personal injury or damage to the Library: 1) observe
local health and safety requirements and guidelines for manual material handing, 2) always remove
all tapes to reduce the overall weight of the Library, and 3) obtain adequate assistance to lift and
stabilize the Library during installation or removal.
The device easily installs into the HP Rack System/E, or the HP Rack 5000 or HP Rack 10000 series.
You need a #2 and a #3 Phillips screwdriver for this procedure.
Figure 20 Rack kit
.
• Two rails
• Two bags of eight M6 screws.
The accessory package contains two sets of eight M6 screws, along with four clip nuts for the MSL4048
or six clip nuts for the MSL8048 or MSL8096. Select the bag of screws appropriate for your type of
rack.
• The HP Rack System/E rack has 7.1 mm round holes in the rack column. The packet for this rack
type is labeled
HP Rack System/E .
• The HP Rack 5000 and 10000 series have 9.5 mm square holes in the rack column. The packet
for these rack types is labeled
HP Rack 5000, 10000 Series.
To install the rails into the rack:
1. Using the screws for your rack type and a #3 Phillips screwdriver, secure one rail to each side
of the rack in your chosen rack location.
Installing the Tape Library 46