HP StorageWorks MSL2024 User'S And Service Manual Download Page 151 | Manualshive

Page: 151 / 276

background image

5.

Select the Library in the

By Product

device list tab, and then select the

Firmware

button. The latest

revision available for the Library is automatically selected.

6.

Click

Start Update

to update the firmware for the Library.

Using a firmware upgrade tape to update drive firmware (Support> FW Upgrade > By Tape)

This option allows the updating of drive code using a firmware upgrade tape. No operations will be
available until the update completes. Access to this feature requires the administrator password. To
use this command, select the drive or drives to be upgraded, and then select where you want to load
the firmware upgrade tape from.

•

Source Type

: This toggles between all available sources: magazines and drives.

•

Source

: This toggles between available source cartridges. You can select a specific slot (Source

field) or specify the firmware upgrade tape's barcode (Source by Label field). Unlabeled tapes
need to be accessed by their slot number.

NOTE:

To use the

All Drives

function all the drives must be of the same type. If they are not, you are

warned: “Not all drives the same. Upgrade drives individually”. Press

OK

to return to the option

list with All Drives highlighted.

Force ejecting a drive (Support > Force Drive Eject)

This option attempts to force the tape drive to eject the tape and place it into an open slot in the
Library. Access to this feature requires the administrator password.

Before issuing this command, HP recommends that you attempt to eject the tape using the backup
software and move command on the operator control panel. While a drive is being force ejected, a
window indicating the process is ongoing should appear. No operations will be available until force
eject completes.

NOTE:

If the drive has difficulty ejecting the tape, suspect bad or damaged media.

Downloading a support ticket (Support > Support Ticket)

A support ticket provides information that can help you or a service engineer diagnose problems with
the Tape Library. You can view the support ticket with Library & Tape Tools version 4.2 and later.
Downloading the support ticket to a USB flash drive lets you view the ticket on a computer that is not
connected to the Tape Library. Access to this feature requires the administrator password.

Rebooting the Tape Library (Support > Reboot)

This option reboots the Tape Library and the tape drives within the Library and forces a new cartridge
inventory, clearing any current error condition. It updates drive lists in sub-menus. Access to this feature
requires the administrator password.

HP StorageWorks MSL2024, MSL4048, MSL8048, and MSL8096 Tape Libraries User and service

guide

151

«
...
149
150
151
152
153
...
»

Summary of Contents for StorageWorks MSL2024





















































































































































































































































































Reviews:

No comments

Related manuals for StorageWorks MSL2024

Brand: Hama Pages: 8

SUPERSERVER 6027TR-H71FRF

Brand: Supero Pages: 118

Brand: Quantum Pages: 345

Brand: Y-E Data Pages: 48

Brand: IBM Pages: 2

SATAII/300 INTERNAL HARD DRIVE

Brand: Maxtor Pages: 19

Brand: Galvo Shed Pages: 8

5BIG THUNDERBOLT 2

Brand: LaCie Pages: 20

Brand: Fujitsu Pages: 17

Brand: Fujitsu Pages: 34

Brand: Fujitsu Pages: 114

Brand: Fujitsu Pages: 130

GRANPOWER500 TEAMSERVER Series

Brand: Fujitsu Pages: 14

Brand: Fujitsu Pages: 142

MAN3367FC - Enterprise 36.7 GB Hard Drive

Brand: Fujitsu Pages: 148

HARD DISK DRIVES MAW3073FC

Brand: Fujitsu Pages: 112

Brand: Fujitsu Pages: 52

Brand: Fujitsu Pages: 182

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands