manage the Library and will not receive traps from the Library. You can select the SNMP version
for each target address.
•
Community Name — a string used to match the SNMP management station and device. It must
be set to the same name on both the management station and the Library. The default community
name is
public
.
•
SNMP Trap Notification Filter — the types of events for which the device should send SNMP traps.
•
IPv4 or IPv6 Management Station — IP address of the Command View TL management station.
Only one management station can be configured. If both IPv4 and IPv6 IP addresses are provided,
only the IPv4 address will be used
Configuring HP Systems Insight Manager for the Tape Library
The Library uses the HP NetCitizen MIB, which is supported by HP Systems Insight Manager (SIM)
and many other applications. To detect the Tape Library using a remote management application,
such as HP SIM, you must first add the IP address for the management system as an SNMP target
using the network configuration. SNMP queries are only accepted from configured targets.
To configure the Library for use with HP SIM:
1.
From the RMI, add the HP SIM management station as an SNMP target.
2.
If the Library IP address is in an HP SIM automatic discovery IP address list, the SIM management
station will detect the Library at the next scheduled scan.
To configure HP SIM for manual discovery:
1.
In the HP SIM toolbar, click
Options > Discovery
.
2.
Click the
Manual
tab.
3.
Enter the Library's IP address or system name.
SIM 5.1 will automatically detect the system type and product name.
To manually identify the Library with SIM 5.0 and older:
1.
In the HP SIM
System and Event Collections
pane, click
Systems by Type
.
2.
In the
Systems by Type
pane, click
All systems
.
3.
Click the link with the IP address or name of the Tape Library.
4.
Click the
Tools & Links
tab.
5.
Click
Edit System Properties
.
6.
Set
System Type
to
Tape Library
.
7.
Enter the
Product Model
of your Tape Library.
8.
Click
OK
.
Changing the administrator password
Use the
to change the administrator password for the RMI and OCP.
Operating the Tape Library
92
Summary of Contents for StorageWorks MSL2024
