Repair Information
93
Edge Switch 2/12 Service Manual
Online
On or
Blinking
Off
An attached device is connected to the
switch and ready to communicate, or
is communicating through the switch
with other attached devices.
If the port remains online at 1.0625
Gbps, the blue/green LED illuminates
green. If the port remains online at
2.125 Gbps, the blue/green LED
illuminates blue.
At the switch, the blue/green LED
blinks green when there is Fibre
Channel traffic through the port at
1.0625 Gbps. At the switch, the
blue/green LED blinks blue when there
is Fibre Channel traffic through the
port at 2.125 Gbps.
Beaconing
Off, On, or
Blinking
Blinking
The port is beaconing. The amber port
LED blinks once every two seconds to
enable users to locate the port.
Invalid
Attachment
On
Off
The port has an invalid attachment.
The reason appears in the
Reason
field
of the
Port Properties page
of the EWS
View panel
.
Link Incident
Off
Off
A link incident occurred. The alert
information appears in the EWS event
log.
Link Reset
Off
Off
The switch and attached device are
performing a link reset operation to
recover the link connection. This is a
transient state that should not persist.
No Light
Off
Off
No signal (light) is received at the
switch port. This is a normal condition
when there is no cable attached to the
port or when the attached device is
powered off.
Table 15: Port Operational States (Continued)
Port
State
Blue/Green
LED
Amber
LED
Description