Diagnostics
83
Edge Switch 2/12 Service Manual
8. Set both switches online. Refer to “
Set the Switch Online or Offline
Did the domain ID change solve the problem and did both switches join through
the ISL to form a fabric?
NO
YES
↓
The switch, associated ISL, and multiswitch fabric appear
operational. Exit MAP.
Contact the next level of support. Exit MAP.
15
A switch E_Port segmented because two switches had incompatible zoning
configurations. An identical zone name is recognized in the active zone set for
both switches, but the zones contain different members.
1. Work with the system administrator to determine the desired zone name
change for one of the affected switches. Zone names must conform to the
following rules:
— The name must be 64 characters or fewer in length.
— The first character must be a letter (a through z), upper or lower case.
— Other characters must be alphanumeric (a through z
or 0 through 9), dollar sign ($), hyphen (-), caret (^), or underscore (_).
2. At the View panel, select Configure at the left side of the panel. The
Configure panel opens with the Ports page displayed.
3. Click the Zoning tab, then click the Zones tab. The Zones page displays.
4. Inspect zone names (listed under Display Previous Zones) in the active zone
set to determine the incompatible name.
5. Modify the incompatible zone name as directed by the customer. Refer to the
HP StorageWorks Edge Switch 2/12 Installation Guide for more information
on configuring zones.
Did the zone name change solve the problem and did both switches join through
the ISL to form a fabric?
NO
YES
↓
The switch, associated ISL, and multiswitch fabric appear
operational. Exit MAP.
Contact the next level of support. Exit MAP.
