HP StorageWorks Edge Switch 2/12 Service Manual Download Page 123

Page: 123 / 176

Repair Information

123

8. To change the switch IP address and restart the EWS interface, refer to the

HP StorageWorks Edge Switch 2/12 Installation Guide. To restart the EWS
interface using the default IP address of 10.1.1.10:

At the browser, enter the default IP address of 10.1.1.10 as the Internet
uniform resource locator (URL). A username and password entry dialog
box displays.

Type the default user name and password.

Note:

The default user name is

Administrator

and the default password is

password

The user name and password are case-sensitive.

Click OK. The EWS interface opens with the View panel open and the
Switch page displayed. The procedure is complete.

Summary of Contents for StorageWorks Edge Switch 2/12

















































































































































































Search results

Summary of Contents for StorageWorks Edge Switch 2/12

Reviews:

Related manuals for StorageWorks Edge Switch 2/12

Brands by name

Popular brands

HP StorageWorks Edge Switch 2/12, Service Manual

Search results

Summary of Contents for StorageWorks Edge Switch 2/12

Reviews:

Related manuals for StorageWorks Edge Switch 2/12

Brands by name

Popular brands