HP StorageWorks Edge Switch 2/12, Service Manual

Page: 37 / 176

Diagnostics
37 Edge Switch 2/12 Service Manual
2. Disable port beaconing at the EWS interface:
a. At the View panel, select Operations at the left side of the panel. The
Operations panel opens with the Switch and Beacon pages displayed.
b. Click the Port tab. The Operations panel opens with the Port and
Beacon pages displayed.
c. Click the check box (checked) in the Beaconing State column and click
Activate to remove the check mark and disable beaconing. The message
Your changes have been successfully activated
appears.
Continue to the next step.
13
At the View panel, does the Operational State field display a
Segmented
message?
NO YES
↓
Port segmentation is indicated. Go to step 18 to obtain event codes. If
no event codes are found, go to “ MAP 0600: Fabric, ISL, and
Segmented Port Problem Determination ” on page 76. Exit MAP.
14
At the View panel, does the Operational State field display a message indicating
a port problem?
NO YES
↓
Go to step 18 to obtain event codes. If no event codes are found, go to
“ MAP 0500: Port Failure and Link Incident Analysis ” on page 59.
Exit MAP.
15
Repeat step 11 through step 14 for each remaining Fibre Channel port for which a
problem is suspected (ports 0 through 11).
Is a problem indicated for any of the ports?
NO YES
↓
Go to step 18 to obtain event codes. If no event codes are found, go to
“ MAP 0500: Port Failure and Link Incident Analysis ” on page 59.
Exit MAP.