HP StorageWorks Edge Switch 2/12 Service Manual Download Page 72 | Manualshive

Page: 72 / 176

background image

Diagnostics

72

Edge Switch 2/12 Service Manual

7. Click the Fabric Binding tab. The Fabric Binding page displays.

8. Ensure the fabric binding membership lists are compatible for both switches

— To add a member (new fabric) to the fabric binding membership list

displayed at the bottom of the page, type a new domain ID (range is 1
through 31) in the Domain ID field, type a new WWN in the WWN field,
and click the adjacent Add Member button.

— To delete a fabric from the fabric binding membership list, click the

Delete button adjacent to the fabric domain ID and WWN. A
confirmation dialog box appears. Click OK to close the dialog box and
delete the fabric.

9. Click Save and Activate to save and activate the displayed fabric binding

configuration. A confirmation dialog box appears. Click OK to close the
confirmation dialog box, activate the fabric binding configuration, and change
the status to Saved & Active.

Did configuring the fabric and switch binding parameters solve the problem?

NO

YES

↓

The switch appears operational. Exit MAP.

Contact the next level of support. Exit MAP.

31

A port connection is not allowed because of a fabric binding mismatch between
fabric elements. Fabric binding membership lists must be compatible for both
switches. At the EWS interface for both switches:

1. At the View panel, select Configure at the left side of the panel. The

Configure panel opens with the Ports page displayed.

2. Click the Security tab, then click the Fabric Binding tab. The Fabric

Binding page displays.

3. Ensure the fabric binding membership lists are compatible for both switches

— To add a member (new fabric) to the fabric binding membership list

displayed at the bottom of the page, type a new domain ID (range is 1
through 31) in the Domain ID field, type a new WWN in the WWN field,
and click the adjacent Add Member button.

— To delete a fabric from the fabric binding membership list, click the

Delete button adjacent to the fabric domain ID and WWN. A
confirmation dialog box appears. Click OK to close the dialog box and
delete the fabric.

«
...
70
71
72
73
74
...
»

Summary of Contents for StorageWorks Edge Switch 2/12

















































































































































































Reviews:

No comments

Related manuals for StorageWorks Edge Switch 2/12

Brand: Barracuda Networks Pages: 2

IntelliJack NJ200

Brand: 3Com Pages: 4

Brand: M2M Pages: 9

Brand: H3C Pages: 16

Brand: H3C Pages: 24

Brand: Idis Pages: 31

Brand: Patton electronics Pages: 65

Wireless Mini PCI Module

Brand: E-Tech Pages: 42

Brand: Magnadyne Pages: 8

Brand: Razer Pages: 17

Brand: Topcom Pages: 16

Brand: 3Com Pages: 12

Brand: Maestro Wireless Solution Pages: 22

Brand: Linksys Pages: 2

Brand: Garderos Pages: 21

Brand: Supermicro Pages: 62

Brand: Planet Pages: 67

Brand: C&H Technologies Pages: 1

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands