Repair Information
115
Edge Switch 2/12 Service Manual
Switch Reset
To reset the switch from the front panel:
1. Press and hold the IML/RESET button for approximately ten seconds.
— After holding the button for three seconds, the amber
ERR LED blinks at twice the unit beaconing rate.
— After holding the button for ten seconds, the ERR LED
stops blinking, and all front panel LEDs illuminate.
2. Release the button to reset the switch. During the reset:
— The green power (PWR) LED on the switch front panel illuminates.
— The amber system error (ERR) LED on the switch front panel blinks
momentarily while the switch is tested.
— The green LED associated with the Ethernet port blinks momentarily
while the port is tested.
— The blue/green and amber LEDs associated with the ports blink
momentarily while the ports are tested.
— The switch-to-PC Ethernet link drops momentarily until the connection
automatically recovers.