HP StorageWorks 12000, User Manual

Page: 93 / 266

1. Save your configuration settings. See “ Saving Configuration Settings ” on page 148.
2. Download the VLS Firmware and Quick Restore CD Image appropriate for your VLS system from
the HP website.
3. Burn the image to CD to create your own quick restore CD.
4. Follow the “ Recovering from Operating System Failure ” on page 213 procedure for re-installing
the operating system, including the instructions specific to restoring primary nodes.
NOTE:
You must install the quick restore CD on each node of the VLS.
Installing the Deduplication Licenses
The deduplication feature is a licensed option. The number of deduplication licenses must match or
exceed the number of capacity licenses (based on LTU) on the VLS device. See
“
Installing Additional Licenses ” on page 45 for installation instructions.
After installing the required deduplication licenses, the VLS automatically reboots. When the system
is back up, it first checks the standard capacity licenses and then the deduplication licenses. Once
the deduplication licenses are verified, the deduplication feature is automatically enabled for all
supported backup types.
No further setup is required. When the next backup begins, the deduplication process begins mapping
the content of that backup. After the second backup, the system delta-differences (compares) the two
backups and the deduplication proceeds.
You may choose to disable some backup types; see Configuring Deduplication Options for details.
Configuring Deduplication Options
You can include or exclude specific backups or types of backup (e.g., server type) from the
deduplication process and choose the deduplication algorithm used.
NOTE:
These options are not available until you have installed the appropriate number of deduplication
licenses.
1. Select the System tab.
2. Expand Chassis on the navigation pane.
3. Expand Deduplication on the navigation pane.
HP StorageWorks 93