HP StorageWorks 12000 User Manual Download Page 82

Page: 82 / 266

If the library on which you want to add a LAN/WAN replication target appears in the list, select
that library. The

Summary for all LAN/WAN Replication Targets

screen displays all LAN/WAN

replication targets created for that library.

If the library does not appear in the navigation pane, it means that the library does not yet have
any LAN/WAN replication targets on it. Select

LAN/WAN Replication Targets

in the navigation

pane instead. The

Summary for All LAN/WAN Replication Targets

screen displays all LAN/WAN

replication targets created for all libraries.

Select

Create LAN/WAN Replication Target

from the task bar to open the

Create LAN/WAN

Replication Target

screen.

Enter a name for the LAN/WAN replication target. See

Figure 19

Figure 19 Creating a LAN/WAN replication target

If you did not select your library from the navigation pane, select the library on which you want
to add the target from the

Local Library

pull-down field.

The Available Slot Ranges section indicates the slots that are available on the library you just
selected.

NOTE:

If you selected your library from the navigation pane, this pull-down field does not appear
because you have already selected the appropriate library.

Enter a start slot and an end slot for the copy pool from within the available ranges.

Enter the number of maximum simultaneous transfers permitted.

This allows you to limit the replication activity on that target. This field defaults to the maximum
number of transfers allowed by the VLS.

Select a Compress option from the pull-down field.

The options are Global Setting, Yes (compression is on), and No (compression is off). See
“

Setting the Global LAN/WAN Replication Target Configuration Settings

” on page 84 to set the

global default.

10.

Enter a registration password, and then retype it in the next field.

Automigration/Replication

Summary of Contents for StorageWorks 12000











































































































































































































































































Search results

Summary of Contents for StorageWorks 12000

Reviews:

Brands by name

Popular brands

HP StorageWorks 12000, User Manual

Search results

Summary of Contents for StorageWorks 12000

Reviews:

Brands by name

Popular brands