HP StorageWorks 1/8 User'S And Service Manual Download Page 77 | Manualshive

Page: 77 / 204

HP StorageWorks 1/8 User'S And Service Manual Download Page 77

The demo and slot to slot test are intended to show the device operating. For service and diagnostics,
execute the wellness test from the OCP. See “

The wellness test

” on page 128.

HP Service -

Service restricted

The

Support: HP Service page

page can only be accessed by service personnel to execute detailed

tests on the different components of the device or special read/write diagnostics on the drives.

Figure 51 Support: HP Service page

.

Determining and updating firmware

Use the

Support: Firmware page

to see the current version of the device and drive firmware, and

upload new firmware. The firmware files must be in the HP L&TT format with the .frm file extension.
You can find firmware files on the HP Support website: http://www.hp.com/support. After the firmware
is updated, the device or tape drive with updated firmware is reset.

CAUTION:

Do not interrupt the device while a firmware update is in progress. Updating the tape drive firmware
can take several minutes because the firmware is transferred through a serial connection.

HP StorageWorks 1/8 G2 Tape Autoloader User and service guide

77

«
...
75
76
77
78
79
...
»

Summary of Contents for StorageWorks 1/8













































































































































































































Reviews:

No comments