manualshive.com logo in svg

HP StorageWorks 1/8, User'S And Service Manual, Page: 105 / 204

Share
Download
HP StorageWorks 1/8 User'S And Service Manual Download Page 105

1.

From the Home screen, press

Previous 

or

 Next

until the screen displays

Support

. Press

Enter 

to

select.

2.

Press

Previous

or

Next

until the screen displays

Autoloader Error Log

to see error messages or

Autoloader Warning Log

to see warnings. Press

Enter

to select.

3.

Enter the administrator password, if prompted.

4.

Press

Enter

to see the message description. Press

Cancel

to return to the message code.

5.

Press

Next

to see the next message.

Downloading a support ticket (Support > Download Support Ticket)

A support ticket contains information that can help a system administrator or support engineer diagnose
device problems. Use this option to download a support ticket to a USB flash drive. Downloading the
support ticket to a USB flash drive lets you view the ticket on a computer that is not connected to the
device. You can view the support ticket with the Library & Tape Tools.

To download a support ticket:

1.

Insert a USB flash drive into the USB port on the back panel.

2.

From the Home screen, press

Previous

or

Next

until the screen displays

Support

. Press

Enter 

to

select.

3.

Press

Previous

or

Next

until the screen displays

Download Support Ticket

. Press

Enter

to select.

Forcing the drive to eject a tape (Support > Force Drive To Eject Tape)

Use this option to make the tape drive eject the tape and place it into an open slot. Before issuing
this command, attempt to eject the tape with the move command (See “

Moving tapes in the Autoloader

(Operations > Move Tape)

” on page 98).

To force the tape to eject:

1.

From the Home screen, press

Previous

or

Next

until the screen displays

Support

. Press

Enter 

to

select.

2.

Press

Previous

or

Next

until the screen displays

Force Drive To Eject Tape

. Press

Enter

to select.

3.

Press

Previous

or

Next

until the screen displays

Drive

. The second line on the display shows the

bar code number of the tape,

Full

, or

Empty. 

Press

Enter

to select the desired drive to eject the

tape.

4.

If the tape is successfully ejected from the drive, the screen displays the slot location where the
tape was moved to.

NOTE:

If the drive has difficulty ejecting the tape, suspect bad or damaged media.

HP StorageWorks 1/8 G2 Tape Autoloader User and service guide

105

Summary of Contents for StorageWorks 1/8













































































































































































































Reviews:

No comments