HP StorageWorks 1/8, User'S And Service Manual, Page: 134 / 204

Main error code descriptions
Table 32 Main error codes
Details and solution Description Error code
Power-cycle the unit and retry the operation. Cannot initialize bar code reader 80
• Power-cycle the unit and retry the opera-
tion.
• Update the firmware to the latest version.
No response from bar code reader 81
Power-cycle the unit and retry the operation.
No response from EEPROM on robotic
controller
82
• Power-cycle the unit and retry the opera-
tion.
• Update the firmware to the latest version.
Setting of gripper
1
motor parameters failed
84
Setting of slider
2
motor parameters failed
85
Setting of elevator
3
motor parameters failed
86
Setting of rotation
4
motor parameters failed
87
Setting of sled
5
motor parameters failed
88
• Ensure that nothing is obstructing the
gripper.
• If the device was moved, verify that each
of the tape cartridges is properly seated
in a magazine.
• Run the wellness test.
Gripper
1
obstructed
89
Troubleshooting 134