HP ProLiant DL380e User Manual Download

Page: 17 / 155

RBSU menu (HP ProLiant G7 servers or server blades) 17

For more information on Advanced Memory Protection, see the HP website
(

http://h18004.www1.hp.com/products/servers/technology/memoryprotection.html

USB Options (G7 servers)

•

USB Control (G7 servers) (on page

)

•

USB 2.0 Controller (G7 servers) (on page

)

•

Removable Flash Media Boot Sequence (G7 servers) (on page

)

USB Control (G7 servers)

The USB Control menu determines how USB ports and embedded devices operate at startup:

•

When USB Enabled is selected, all USB ports and embedded devices are enabled.

•

When USB Disabled is selected, all USB ports and embedded devices are disabled.

•

When Legacy USB Disabled is selected, all USB ports are enabled under a USB-aware OS, but USB
is not supported during POST or RBSU. Legacy USB Disabled also disables iLO 2 virtual devices.

Summary of Contents for ProLiant DL380e




























































































































































Search results

Summary of Contents for ProLiant DL380e

Reviews:

Related manuals for ProLiant DL380e

Brands by name

Popular brands

HP ProLiant DL380e, User Manual

Search results

Summary of Contents for ProLiant DL380e

Reviews:

Related manuals for ProLiant DL380e

Brands by name

Popular brands