Home
/
HP
/
ProLiant DL380e
/
User Manual

HP ProLiant DL380e, User Manual, Page: 135 / 155

Share

Page: 135 / 155

HP ProLiant DL380e User Manual Download Page 135

ROM-based enhancements 135

Inspect Utility

The Inspect Utility is embedded in the system ROM and allows you to view system configuration
information and save the information to a file on a diskette. Press the

F2

key to place all Inspect

information onto a diskette.
This utility replaces the version of the Inspect Utility that is a part of the legacy system-partition functionality
supported on some HP servers.
If the server has the Inspect Utility feature, select

Inspect Utility

from the System Maintenance menu.

Diagnostics Utility

The Diagnostics Utility is embedded in the system ROM, and provides a pre-boot method for quickly

checking the validity of the three major subsystems of the server needed to boot an operating system. A
complete server diagnostics is available on the SmartStart CD.
All three of these tests should pass if a bootable operating system is installed on the server.
If any test fails, there may be a problem booting the server. To run the Diagnostics Utility, select

Diagnostics Utility

from the System Maintenance menu.

«
...
133
134
135
136
137
...
»

Summary of Contents for ProLiant DL380e




























































































































































Reviews:

No comments