manualshive.com logo in svg

HP ProLiant DL380e, User Manual, Page: 4 / 155

Share
Download
HP ProLiant DL380e User Manual Download Page 4

 

 

Set Administrator Information (G7 servers) .......................................................................................... 71 
Set Service Contact Text (G7 servers) ................................................................................................. 72 
Custom POST Message (G7 servers) .................................................................................................. 73 

Advanced Options (G7 servers) ................................................................................................................... 73 

Advanced System ROM Options (G7 servers) ..................................................................................... 74 
Video Options (G7 servers) ............................................................................................................... 82 
Power Supply Requirements Override (HP ProLiant DL580 G7 Servers) .................................................. 82 
Thermal Configuration (G7 servers) .................................................................................................... 83 
Service Options (G7 servers) ............................................................................................................. 84 
Advanced Performance Tuning Options (G7 servers) ........................................................................... 86 
Drive Write Cache (G7 servers) ......................................................................................................... 96 
Asset Tag Protection (G7 servers) ....................................................................................................... 97 

System Default Options (G7 servers) ............................................................................................................ 98 

Restore Default System Settings (G7 servers) ....................................................................................... 99 
Restore Settings/Erase Boot Disk (G7 servers) ................................................................................... 100 
User Default Options (G7 servers) .................................................................................................... 101 

Utility Language (G7 servers) ..................................................................................................................... 102 

RBSU menu (HP ProLiant G6 and earlier servers or server blades) .................................................. 103 

RBSU menu overview ................................................................................................................................ 103 
System Options ........................................................................................................................................ 104 

Embedded Serial Port A .................................................................................................................. 105 
Embedded Serial Port B .................................................................................................................. 105 
Virtual Serial Port ........................................................................................................................... 106 
Optional LPT Port ........................................................................................................................... 107 
Optional LPT Mode Support ............................................................................................................ 107 
Integrated Diskette Controller ........................................................................................................... 107 
NUMLOCK Power-On State ............................................................................................................ 107 
Embedded NICs ............................................................................................................................ 108 
Diskette Write Control .................................................................................................................... 108 
Diskette Boot Control ...................................................................................................................... 108 
Advanced Memory Protection .......................................................................................................... 108 
USB Control ................................................................................................................................... 109 
USB 2.0 EHCI Controller ................................................................................................................. 110 
Power Regulator for ProLiant ............................................................................................................ 110 
USB External Port Capability ........................................................................................................... 111 
Ultra Low Power State ..................................................................................................................... 112 

PCI Devices ............................................................................................................................................. 113 
Standard Boot Order (IPL) ......................................................................................................................... 114 
Boot Controller Order ............................................................................................................................... 114 
Date and Time ......................................................................................................................................... 115 
Server Availability .................................................................................................................................... 115 

ASR Status ..................................................................................................................................... 116 
ASR Timeout .................................................................................................................................. 116 
Thermal Shutdown .......................................................................................................................... 116 
Wake-On LAN ............................................................................................................................... 116 
POST Speed Up ............................................................................................................................. 116 
POST F1 Prompt ............................................................................................................................. 116 
Power Button ................................................................................................................................. 117 
Automatic Power-On ....................................................................................................................... 117 
Power-On Delay ............................................................................................................................. 117 

Server Passwords ..................................................................................................................................... 117 

Set Power-On Password .................................................................................................................. 118 
Set Admin Password ....................................................................................................................... 118 

Summary of Contents for ProLiant DL380e




























































































































































Reviews:

No comments