RBSU menu (HP ProLiant G6 and earlier servers or server blades) 126
•
Virtual Install Disk (on page
128
)
•
Secondary IDE Channel Support (on page
128
)
•
BIOS Enhanced RAID (on page
129
)
•
Node Interleaving (on page
129
)
•
Serial Number (on page
129
)
•
Product ID (on page
129
)
•
Drive Write Cache (on page
129
)
•
SATA Software RAID (on page
129
)
•
Optional PCI-X Riser Fan Monitoring (on page
129
)
•
Processor Options (on page
130
)
•
Power Supply Requirements Override (on page
131
)
•
Embedded VGA Control (on page
131
)
IMPORTANT:
Menu options may differ from those in this document, depending on specific
server options.
Multi-Processor Specification (MPS) Table Mode
The MPS Table Mode option is automatically set, based on the OS selected, and is used for interrupt
routing.
IMPORTANT:
This setting is pre-selected. You can override the default setting at this menu, but
successful OS operation is dependent upon the correct (default) setting.
Summary of Contents for ProLiant DL380e
