manualshive.com logo in svg

HP Kayak XA-s 02xx, User Manual, Page: 95 / 148

Share
Download
HP Kayak XA-s 02xx User Manual Download Page 95

English

83

4   Technical Information

System Specifications

Audio Features

Feature:

Description:

Digitized Sounds

•

Compatible SoundBlaster® Pro Adlib®/OPL3®

•

16-bit and 8-bit stereo sampling from 4 kHz to 55.2 
kHz

•

Programmable sample rates with 1 Hz resolution

•

Full duplex capture and playback at different sample 
rates

•

Up to six different simultaneous sample rates

•

Dual Tune F DMA transfer on channel 0, 1, 2 or 3

•

Advanced 16-bit software-based real-time audio 
compression/decompression system with the 
following standards: PCM, Microsoft ADPCM, 
SoundBlaster ADPCM in SB mode, CCITT A-Law, 
CCItt 

•

16-bit software-based real-time audio 
compression/decompression system with the 
following standards: Creative ADPCM (16:4), CCITT 
A-law (16:8), and CCITT 

µ

-

law. 

•

Automatic dynamic filtering for digital audio recording 
and playback

Music Synthesizer

•

MPU401 compatible MIDI port

•

Support for Hardware and Software Wave table 
Synthesizer

•

Integrated OPL3® compatible music synthesizer

Enhanced Stereo

•

Built-in “Phat Stereo” for enlargement of Stereo 
Image

Mixer

•

MPC-3 audio mixer

•

Input mixing sources: MIDI, microphone, LINE IN, 
CD Audio, AUX Audio, and up to four digitized sounds

•

Output mixing of all audio sources to the LINE OUT or 
integrated PC Workstation speaker 

•

Multiple source recording and Left/Right channels 
mixing

•

32-level volume control for microphone, LINE IN, 
CD Audio, AUX Audio and master volume

•

64-level volume control for digital sounds, wave or 
PCM data

geron.bk : geron-4.fb4  Page 83  Sunday, March 22, 1998  5:03 AM

Summary of Contents for Kayak XA-s 02xx





















































































































































Reviews:

No comments