manualshive.com logo in svg

HP Kayak XA-s 02xx, User Manual, Page: 38 / 148

Share
Download
HP Kayak XA-s 02xx User Manual Download Page 38

2   How to Install Accessories Inside Your PC Workstation

Removing and Replacing the Cover

26

English

4

Lower the latches on the front sides of the cover.

5

If required, lock the cover using the key provided.

6

Reconnect all the power cables.

Intrusion Monitor

Your PC Workstation is equipped with an intrusion monitor, which is 
located on the front of the PC Workstation, behind the Hardware 
Control Panel. It is designed to detect whether your PC Workstation 
has been opened since the last time it was used:

•

If your PC Workstation has been opened, it is assumed that the 
system configuration has changed and a full start-up check is carried 
out. 

•

If your PC Workstation has not been opened, it is assumed that the 
system configuration has not changed and a reduced start-up check 
is carried out.

geron.bk : geron-2.fb4  Page 26  Sunday, March 22, 1998  5:03 AM

Summary of Contents for Kayak XA-s 02xx





















































































































































Reviews:

No comments