manualshive.com logo in svg

HP Kayak XA-s 02xx, User Manual, Page: 113 / 148

Share
Download
HP Kayak XA-s 02xx User Manual Download Page 113

English

101

4   Technical Information

Using the SCSI Configuration Utility (Selected Models)

Adapter Setup Menu

When you select Adapter Setup from the Adapter Utilities menu, the 
Adapter Setup menu is displayed:

The settings in this menu are global settings that effect the selected 
host adapter and all SCSI devices attached to it.

SCAM Support

The Symbios Logic BIOS version 4.x and above supports the SCSI Plug 
and Play protocol called SCAM (SCSI Configured AutoMatically). You 
can turn this off if you wish.

Parity 

Symbios Logic PCI to SCSI host adapters always generate parity, but 
some SCSI devices do not. For this reason you can disable parity 
checking.

NOTE

When disabling parity checking, you may have to disable disconnects for 
certain devices as parity checking for the re-selection phase is not 
disabled. If a device does not generate parity, and it disconnects, the I/O 
never completes because the re-selection never completes.

Symbios Logic SCSI Configuration Utility

Version 1.07

1. SYM53C875

Adapter Setup

SCAM Support

On

Parity

Enabled

Host SCSI ID

7

Scan Order

Low to High (0..Max)

Removable Media Support
CHS Mapping

 Help.

Restore Default Setup.
Exit this menu.

Use arrow keys to select from menu. Then press ENTER

BIOS Code Segment: C800

geron.bk : geron-4.fb4  Page 101  Sunday, March 22, 1998  5:03 AM

Summary of Contents for Kayak XA-s 02xx





















































































































































Reviews:

No comments