manualshive.com logo in svg

HP Kayak XA-s 02xx, User Manual, Page: 120 / 148

Share
Download
HP Kayak XA-s 02xx User Manual Download Page 120

5   Hewlett Packard Support and Information Services

Introduction

108

English

Introduction

Hewlett Packard computers are engineered for quality and reliability to 
give you many years of trouble-free service. To ensure that your 
desktop system maintains its reliability and to keep you up-to-date with 
the latest developments, HP and a worldwide network of trained and 
authorized resellers provide a comprehensive range of service and 
support options which are listed below:

•

HP-Authorized Reseller

•

HP SupportPack

•

HP Support Assistant CD-ROM

•

HP Information Services

•

HP Support Services

Technical phone support
Lifeline phone support
Network phone-in support

NOTE

When calling any of the international telephone numbers listed in this 
chapter, replace the ‘+’ with your international telephone access code.

Service

Means of Access

HP Forum on CompuServe

Modem

HP Forum on America Online (US only)

Modem

HP World Wide Web Site

World Wide Web Access

HP Drivers/BIOS diskettes

Delivered by mail

geron.bk : geron-5.fb4  Page 108  Sunday, March 22, 1998  5:03 AM

Summary of Contents for Kayak XA-s 02xx





















































































































































Reviews:

No comments