manualshive.com logo in svg

HP Kayak XA-s 02xx, User Manual, Page: 53 / 148

Share
Download
HP Kayak XA-s 02xx User Manual Download Page 53

English

41

2   How to Install Accessories Inside Your PC Workstation

Installing Mass Storage Devices

10

Connect the data and power cables to the rear of the device. (

The 

connectors are shaped to go in one way only

.)

11

Slide the power supply back into position, and tighten the four self-
retaining screws (see page 28).

12

Replace the HP UltraFlow airflow guide and reconnect the fan to the 
system board (see the illustration on page 27).

13

Install any other accessories before replacing the cover and 
completing the installation.

14

Follow the instructions below to complete the installation.

Completing the Installation of a Hard Disk Drive

When a SCSI Hard Disk 
Drive Is Installed

1

Switch on the computer.

2

To ensure compatibility, use the FDISK utility to delete any 
partitions on the new hard disk.

3

Re-boot the computer.

Refer to the operating system documentation for information on 
formatting a drive.

When an IDE Drive 
Is Installed

1

Switch on the computer.

2

To display the device in POST, press 

 while the PC Workstation 

re-starts.

Power Cable

Data Cable

geron.bk : geron-2.fb4  Page 41  Sunday, March 22, 1998  5:03 AM

Summary of Contents for Kayak XA-s 02xx





















































































































































Reviews:

No comments