manualshive.com logo in svg

HP Kayak XA-s 02xx, User Manual, Page: 61 / 148

Share
Download
HP Kayak XA-s 02xx User Manual Download Page 61

English

49

2   How to Install Accessories Inside Your PC Workstation

Installing a Processor

Installing a Processor

Some operating systems support a second processor for enhanced 
performance. Contact your authorized reseller for up-to-date 
information.

NOTE

The 

Setup

 program provides an option to disable the second processor.

1

Disconnect the computer’s power cord and any LAN or 
telecommunications cable.

2

Remove the computer’s cover (see page 23).

3

Remove the fan connection to the system board.

4

Press the retaining buttons on each side of the HP UltraFlow airflow 
guide and lift it out of the PC Workstation’s case.

5

Slide out the power supply to improve access to the processor 
sockets (see page 27) and carefully place the PC Workstation on its 
side.

6

Remove the transparent airflow guide covering the processor 
sockets.

HP UltraFlow 
Airflow Guide

Retaining button

Fan connection to 
system board

geron.bk : geron-2.fb4  Page 49  Sunday, March 22, 1998  5:03 AM

Summary of Contents for Kayak XA-s 02xx





















































































































































Reviews:

No comments