manualshive.com logo in svg

HP Kayak XA-s 02xx, User Manual, Page: 117 / 148

Share
Download
HP Kayak XA-s 02xx User Manual Download Page 117

English

105

4   Technical Information

Using the SCSI Configuration Utility (Selected Models)

Disconnect

This option lets you enable or disable disconnects for the device. 

Read Write I/O Timeout 
(sec)

This option lets you enter a read write timeout value in seconds for the 
device. 

Scan for Device at Boot 
Time

This option lets you specify whether the device is scanned for at boot 
time. The choices are Yes or No.

Scan for SCSI LUNS

More advanced SCSI devices can have several logical units (LUNs). This 
option lets you specify whether SCSI LUNs are scanned for at boot time. 
The choices are Yes or No.

Queue Tags

This option lets you specify whether queue tags are enabled or disabled. 
In a multi-tasking environment this option must be enabled. It should 
only be disabled for troubleshooting.

Format Disk

This utility can be used to perform a low-level format of a hard disk. 
Most SCSI disks are pre-formatted and do not need low-level formatting. 

Verify Disk Media

This utility scans for media defects on the selected SCSI device. Press 
the 

 key to abort this utility.

Exiting from the Configuration Utility

To exit from the Configuration utility, press 

 the necessary number 

of times to return to the Main menu, and then press 

 to quit.

geron.bk : geron-4.fb4  Page 105  Sunday, March 22, 1998  5:03 AM

Summary of Contents for Kayak XA-s 02xx





















































































































































Reviews:

No comments