HP Kayak XA-s 02xx, User Manual, Page: 75 / 148

English 63
3 Troubleshooting Your PC Workstation
If Your PC Workstation Has a Hardware Problem
•
Check that the Flexible Disks item and the Write on Flexible Disks
item are not set to locked in the
Setup program (Security > Hard-
ware Protection).
•
Clean the flexible disk drive using a diskette cleaning kit.
•
Check that the disk power and data cables are correctly connected.
If the Hard Disk Drive Does not Work
•
Check that the disk power and data cables are correctly connected
(Refer to “Connecting Devices” on page 33).
•
For an IDE drive, check the IDE Device’s configuration settings in
the
Setup program (Advanced > IDE Devices).
•
For an IDE drive, check the Hardware Protection settings in the
Setup program (Security > Hardware Protection).
•
For an IDE drive, check the Boot Device Security settings in the
Setup program (Security > Boot Devices Security).
•
For a SCSI drive, check the SCSI Interface settings in the Setup
program (Advanced > External\ Internal 16\8-bit SCSI (Symbios)
and in the Configure SCSI Utility).
If the Hard Disk Activity
Light Does Not Work If the hard disk activity light does not flicker when the PC Workstation
is accessing the hard disk drive:
•
Check that the control panel connector is firmly attached to the
system board.
•
Check that the disk power and data cables are correctly connected.
geron.bk : geron-3.fb4 Page 63 Sunday, March 22, 1998 5:03 AM