manualshive.com logo in svg

HP Kayak XA-s 02xx, User Manual, Page: 109 / 148

Share
Download
HP Kayak XA-s 02xx User Manual Download Page 109

English

97

4   Technical Information

Using the SCSI Configuration Utility (Selected Models)

Using the SCSI Configuration Utility (Selected Models)

The Symbios Logic SCSI Configuration Utility lets you view and change 
the default configuration for your host adapter and all SCSI devices 
connected to it, or for individual SCSI devices.

Default Settings You Can Change

The following two tables show the configuration settings you can 
change. The first table shows the global settings which impact your 
host adapter and all SCSI devices connected to it. Be very careful if you 
change any of these settings. The second table shows the device 
settings which apply to individual devices.

Settings for the Host Adapter and All Devices

Default Settings

SCAM Support

On

Parity Enabled

Host Adapter SCSI ID

7

Scan Order

Low to High (0-Max)

Removable Media support

None

Settings for Individual SCSI Devices

Default Settings

Synchronous Transfer Rate (MB/sec)

40

Data Width

16

Disconnect

On

Read Write I/O Timeout (secs)

10

Scan for Devices at Boot Time

Yes

Scan for SCSI LUNs

Yes

Queue Tags

Enabled

geron.bk : geron-4.fb4  Page 97  Sunday, March 22, 1998  5:03 AM

Summary of Contents for Kayak XA-s 02xx





















































































































































Reviews:

No comments