HP Kayak XA-s 02xx, User Manual, Page: 41 / 148

English 29
2 How to Install Accessories Inside Your PC Workstation
Installing Memory
Installing Memory
Main Memory Modules
If you need more main memory to run your application software, you
can install up to 768 MB of memory in three DIMM slots.
Main memory upgrades are available in single 32 MB, 64 MB, 128 MB
and 256 MB Non-ECC SDRAM or 64 MB, 128 MB and 256 MB ECC
SDRAM memory modules. You should note that only 100 MHz memory
modules should be used to upgrade your PC Workstation.
CAUTION
Static electricity can damage electronic components. Turn off
all equipment. Do not let your clothes touch the accessory.
To equalize the static electricity, rest the accessory bag on top
of the power supply while you are removing the accessory from
the bag. Handle the accessory as little as possible and with care.
To install a main memory module:
1 Disconnect the computer’s power cord and any LAN or
telecommunications cable.
2 Remove the computer’s cover (see page 23).
3 Remove the fan connection to the system board.
HP UltraFlow
Airflow Guide
Retaining button
Fan connection to
system board
geron.bk : geron-2.fb4 Page 29 Sunday, March 22, 1998 5:03 AM