manualshive.com logo in svg

HP Kayak XA-s 02xx, User Manual, Page: 116 / 148

Share
Download
HP Kayak XA-s 02xx User Manual Download Page 116

4   Technical Information

Using the SCSI Configuration Utility (Selected Models)

104

English

Device Setup Menu

When you select a device from the Device Selections menu, the Device 
Setup menu is displayed:

This menu provides information about an individual SCSI device.

To make changes to these settings, select an item from the list and 
press .

Sync Rate (Mega 
Bytes/sec)

This option lets you set the transfer rate for the device. The available 
choices are Off, 10 MB/sec, 20 MB/sec, or 40 MB/sec. For example, for a 
Fast SCSI device, you would select 10 MB/sec.

Width (bits)

This option lets you set the width, in bits, for the device. The choices are 
8 or 16. For example, if the device is an external SCSI device, you would 
set the width to 8 bits.

Symbios Logic SCSI Configuration Utility

Version 1.00

1. SYM53C875

Dev0 N/A Setup

Sync Rate (Mega Bytes/sec)

40 MB/sec

Width (bits)

16

Disconnect

On

Read Write I/O Timeout (secs)

10

Scan for Device at Boot Time

Yes

Scan for SCSI LUNS

Yes

Queue Tags

Enabled

Format

None

Verify
Help.
Restore Default Setup
Exit this menu.

Use arrow keys to select from menu. Then press ENTER

BIOS Code Segment: C800

geron.bk : geron-4.fb4  Page 104  Sunday, March 22, 1998  5:03 AM

Summary of Contents for Kayak XA-s 02xx





















































































































































Reviews:

No comments