manualshive.com logo in svg

HP Kayak XA-s 02xx, User Manual, Page: 20 / 148

Share
Download
HP Kayak XA-s 02xx User Manual Download Page 20

1   Setting Up and Using Your PC Workstation

Connecting the Power Cords

8

English

Connecting the Power Cords

1

Remove any warning labels that may be covering the computer’s 
power connector on the rear of the computer.

2

Connect the power cords to the display and the computer. (

The 

connectors are shaped to go in one way only

.)

3

Connect the display’s power cord and the computer’s power cord to 
grounded outlets.

WARNING

For your safety, always connect the equipment to a grounded wall 
outlet. Always use a power cord with a properly grounded plug, such 
as the one provided with this equipment, or one in compliance with 
your national regulations. This PC Workstation is disconnected from 
the power by removing the power cord from the power outlet. This 
means the PC Workstation must be located close to a power outlet that 
is easily accessible.

Monitor Power Connector

PC Workstation 
Power Connector

Grounded Outlet

geron.bk : geron-1.fb4  Page 8  Sunday, March 22, 1998  5:03 AM

Summary of Contents for Kayak XA-s 02xx





















































































































































Reviews:

No comments