manualshive.com logo in svg

HP Kayak XA-s 02xx, User Manual, Page: 14 / 148

Share
Download
HP Kayak XA-s 02xx User Manual Download Page 14

1   Setting Up and Using Your PC Workstation

Unpacking Your PC Workstation

2

English

Unpacking Your PC Workstation

WARNING

If you are in any doubt that you can lift the PC Workstation and the 
display safely, do not try to move them without help.

1

When you receive your PC Workstation, unpack all of the 
components:

•

Computer and power cords

•

Display and its video cable

•

HP enhanced keyboard, mouse and headphones

•

Manuals and driver kit.

NOTE

Device drivers, HP utilities, and an online 

Network Administrator 

Guide

 are preloaded on your system and provided in a driver kit.

2

Place the PC Workstation on (or under) a sturdy desk with easily 
accessible power outlets and enough space for the keyboard, mouse, 
and any other accessories.

3

Position the PC Workstation so that its rear connectors are easily 
accessible.

4

Place the display next to the computer.

Installation Tools

No tools are required to install your PC Workstation. However, if you 
plan to install a disk drive or an accessory board inside your 
PC Workstation, you will need a flat-blade screwdriver. For more 
information on installing accessories, refer to  "How to Install 
Accessories Inside Your PC Workstation", on page 21.

geron.bk : geron-1.fb4  Page 2  Sunday, March 22, 1998  5:03 AM

Summary of Contents for Kayak XA-s 02xx





















































































































































Reviews:

No comments