manualshive.com logo in svg

HP Kayak XA-s 02xx, User Manual, Page: 57 / 148

Share
Download
HP Kayak XA-s 02xx User Manual Download Page 57

English

45

2   How to Install Accessories Inside Your PC Workstation

Installing Mass Storage Devices

10

Remove the plastic panel from the cover by pulling the panel from 
the left and unhinging its right-hand side. Store the panel in a safe 
place.

11

Install any other accessories before replacing the cover and 
completing the installation.

Completing the Installation of a Drive

When an IDE CD-ROM 
Drive Is Installed

1

Switch on the computer and press 

 when 

 Setup

 appears.

2

In the

 Setup

 program, select the Advanced menu, the IDE Devices 

submenu. Check that the CD-ROM drive has been detected on the 
IDE channel.

3

Press 

 to save and exit the program.

When a Flexible Disk 
Drive Is Installed

1

Switch on the computer and press 

 when 

 Setup

 appears.

2

In the 

Setup

 program, select the Advanced menu, the Flexible Disk 

Drives submenu, and check that the drive has been detected.

3

Press 

 to save and exit the program.

Unclip and lift out 
the plastic panel 

geron.bk : geron-2.fb4  Page 45  Sunday, March 22, 1998  5:03 AM

Summary of Contents for Kayak XA-s 02xx





















































































































































Reviews:

No comments