manualshive.com logo in svg

HP Kayak XA-s 02xx, User Manual, Page: 2 / 148

Share
Download
HP Kayak XA-s 02xx User Manual Download Page 2

Notice

The information contained in this document is subject to change without 
notice.

Hewlett-Packard makes no warranty of any kind with regard to this material, 
including, but not limited to, the implied warranties of merchantability and 
fitness for a particular purpose. Hewlett-Packard shall not be liable for errors 
contained herein or for incidental or consequential damages in connection with 
the furnishing, performance, or use of this material.

Hewlett-Packard assumes no responsibility for the use or reliability of its 
software on equipment that is not furnished by Hewlett-Packard.

This document contains proprietary information that is protected by copyright. 
All rights are reserved. No part of this document may be photocopied, 
reproduced, or translated to another language without the prior written 
consent of Hewlett-Packard Company.

Adobe® Reader © 1987-1997 Adobe Systems Incorporated. All rights reserved. 
Adobe and Acrobat are trademarks of Adobe Systems Incorporated.
CompuServe® is a registered trademark of CompuServe Incorporated.
Labtec® is a registered trademark of Labtec Enterprises, Inc.
Matrox® is registered trademark of Matrox electronic Systems Ltd.
MGA

TM

 is a trademark of Matrox Graphics, Inc.

Symbios Logic

TM

 is a trademark of Symbios Logic, Inc.

Microsoft® is a U.S. registered trademark of Microsoft Corporation. 
Windows

TM

 is a trademark of Microsoft Corporation.Windows NT® is a 

registered trademark of Microsoft Corporation.
Netscape® is a trademark of Netscape Communications Corporation.
Pentium

TM

 is a trademark of Intel Corporation.

SoundBlaster

TM

 is a trademark of Creative Technology Limited.

Hewlett-Packard France
Performance Desktop Computing Operation
38053 Grenoble Cedex 9
France

 1998 Hewlett-Packard Company

geron.bk : notice.fb4  Page ii  Sunday, March 22, 1998  6:36 AM

Summary of Contents for Kayak XA-s 02xx





















































































































































Reviews:

No comments