HP Kayak XA-s 02xx User Manual Download Page 15

Page: 15 / 148

English

1 Setting Up and Using Your PC Workstation

Connecting the Mouse, Keyboard, Display and Printer

Connect the mouse, keyboard, and display to the back of the
PC workstation.

The connectors are shaped to go in one way only

Tighten the display cable attachment screws.

Connect the printer cable to the back of the computer and tighten the
attachment screws. Use the connector labeled:

•

Parallel (25-pin parallel connector) for a parallel device.

•

Serial A (9-pin serial connector) for a serial device.

•

Serial B (9-pin serial connector) for a second serial device.

NOTE

The Universal Serial Bus (USB) connectors can be used for USB
accessories. Most USB accessories are automatically configured as soon
as they are physically attached to the PC Workstation. USB accessories
are not supported by all operating systems.

Mouse
Connector

Keyboard
Connector

2 USB Connectors
(see note below)

Serial B
Port

Serial A
Port

Parallel
Connector

Monitor
Connector

geron.bk : geron-1.fb4 Page 3 Sunday, March 22, 1998 5:03 AM

Summary of Contents for Kayak XA-s 02xx





















































































































































Search results

Summary of Contents for Kayak XA-s 02xx

Reviews:

HP Kayak XA-s 02xx, User Manual, Page: 15 / 148

Search results

Summary of Contents for Kayak XA-s 02xx

Reviews: