Remote
Remote causes an instrument to change from local control to
remote control. In remote control, the front panel keys are disabled
(except for the
key and the POWER-switch); and the amber
REMOTE annunciator is lighted. The syntax is:
where the device selector is the address of the instrument appended
to the HP-IB port number. Typically, the HP-IB port number is 7,
and the default address for the swept signal generator is 19, so the
device selector is 719. Some BASIC examples:
10
REMOTE 7
which prepares all HP-IB instruments for remote operation (although
nothing appears to happen to the instruments until they are
addressed to talk), or
10
REMOTE 719
which affects the HP-IB instrument located at address 19, or
10
REMOTE 719, 721, 726, 715
which effects four instruments that have addresses 19, 21, 26, and 15.
Related statements used by some computers:
RESUME
Local Lockout
Local Lockout can be used in conjunction with REMOTE to disable
the front panel
key. With the
key disabled, only the
controller (or a hard reset by the POWER switch) can restore local
control. The syntax is:
A BASIC example:
10
REMOTE719
20
LOCALLOCKOUT 7
Getting Started Programming
Summary of Contents for 8360 B Series
Page 363: ...NF N 2 w z P w D I oa 0 i B 6 7 On s5 n 20 a g 9 i T2 ...
Page 406: ...2b Menu Maps Menu Maps 2b 1 ...
Page 407: ...t t m ALC Bandwidth Select Module Sense Low High Auto AUTO Front Rear None ALC MENU ...
Page 412: ...rMENU SELECT 1 Fault Fault Info1 Info2 Fault Info3 Clear Fault S E R V I C E M E N U 6 ...
