Inside the Idle State.
Figure l-36 illustrates the operation of the
idle
state.
*RST
Figure l-36. Inside the Idle State
Turning power on, or sending *RST or
forces the trigger
system to the idle state. The trigger system remains in the
idle state until it is initiated by
or
ON. Once one of these conditions is satisfied,
the trigger system exits downward to the
initiate
state. Note that
sets
:
OFF.
Whenever the trigger system leaves the idle state, it sets the
instrument’s Operation Pending Flag. Returning to idle clears
the flag. The
Operation Pending Flag
is a special bit inside the
instrument that can affect how the instrument responds to certain
commands. You need to know this fact when using
and other commands.
Inside the Initiate State.
Figure l-37 illustrates the operation of the
initiate
state.
O N
Figure l-37. Inside the Initiate State
If the trigger system is on a downward path, it travels directly
through the initiate state without restrictions. If the trigger system
Getting Started Programming
l-l 11
Summary of Contents for 8360 B Series
Page 363: ...NF N 2 w z P w D I oa 0 i B 6 7 On s5 n 20 a g 9 i T2 ...
Page 406: ...2b Menu Maps Menu Maps 2b 1 ...
Page 407: ...t t m ALC Bandwidth Select Module Sense Low High Auto AUTO Front Rear None ALC MENU ...
Page 412: ...rMENU SELECT 1 Fault Fault Info1 Info2 Fault Info3 Clear Fault S E R V I C E M E N U 6 ...
