Power Slope
Function Group
Menu Map
Description
Programming Codes
See Also
POWER
5
This
lets you compensate for system, cable, and waveguide
variations due to changes in frequency, by linearly increasing or
decreasing power output as the frequency increases. RF slope values
may range from -2.50 to
per
The power at the
beginning of the sweep equals the current power level. An asterisk
next to the key label indicates that this feature is active.
POWer:SLOPe:STATe
POWer:SLOPe
Analyzer:
function on, SLO function off. Note that because SL
functions in the fundamental units of
you program the SL
code
where m is 1 (on) or 0 (off); d is the numerical value
in
and t is either “DB” or the ASCII LF terminator. For
example, for a slope of 1.5 dB/GHz use this procedure:
1. 1.5 dB/GHz = 1.5
Hz
2. 1.5
Hz =
3. The programming code is
DB”
Power Sweep
“Power Sweep and Power Slope Operation” in Chapter 1
Operating and Programming Reference P-7
Summary of Contents for 8360 B Series
Page 363: ...NF N 2 w z P w D I oa 0 i B 6 7 On s5 n 20 a g 9 i T2 ...
Page 406: ...2b Menu Maps Menu Maps 2b 1 ...
Page 407: ...t t m ALC Bandwidth Select Module Sense Low High Auto AUTO Front Rear None ALC MENU ...
Page 412: ...rMENU SELECT 1 Fault Fault Info1 Info2 Fault Info3 Clear Fault S E R V I C E M E N U 6 ...
