HP 54645A, User'S And Service Manual

Page: 8 / 301

Run/Stop/Single/Autostore/Erase Operation 4–29
Acquiring Data 4–30
Memory Depth/Record Length 4–31
To run and stop an acquisition 4–33
To take a single trace 4–33
To capture a single event 4–34
To use Autostore 4–36
To Autostore Multiple Single Events 4–37
To erase the waveform display 4–38
Using Digital Channels to Probe Circuits 4–39
Saving and Recalling the Configuration 4–43
Using memories to save and recall configurations 4–43
To save, recall, and clear traces 4–46
To save or recall front-panel setups 4–48
To reset the HP 54645A/D instrument setup 4–48
Configuring the Mixed-Signal Oscilloscope 4–51
To change the logic threshold for input signals 4–51
Using Labels on the Mixed-Signal Oscilloscope 4–53
To turn the label display on or off 4–53
To assign a predefined label to a channel 4–54
To define a new label 4–56
To initialize the label list 4–58
5 Making Measurements with HP 54645A/D Oscilloscopes
Capturing Data 5–3
To use delayed sweep 5–4
To view asynchronous noise on a signal 5–6
To reduce the random noise on a signal 5–8
To capture glitches or narrow pulses with peak detect 5–11
To use channel math 5–12
To use the Roll display mode 5–13
Contents
Contents–3