Chapter 2 Command Summary
Front Panel to SCPI Command Maps
Programming Guide
2-5
Input Channels Conditioning Keys to SCPI Command Map
(Cont.)
1
a.
[:SENSe]:EVENt[1|2]:LEVel[:ABSolute]:AUTO ON|OFF
b1.
[:SENSe]:EVENt[1|2]:LEVel[:ABSolute] <numeric_value> [V]
b2.
[:SENSe]:EVENt[1|2]:LEVel:RELative <numeric_value> [PCT]
c.
[:SENSe]:EVENt[1|2]:SLOPe POSitive | NEGative
d1.
[:SENSe]:EVENt[1|2]:HYSTeresis:RELative 100
*
d2.
[:SENSe]:EVENt[1|2]:HYSTeresis:RELative 50
d3.
[:SENSe]:EVENt[1|2]:HYSTeresis:RELative 0
**
e1.
[:SENSe]:EVENt2:FEED “[:]INPut[1]”
e2.
[:SENSe]:EVENt2:FEED “[:]INPut2”
2
:INPut[1|2]:IMPedance <nume ric_value> [OHM]
3
:INPut[1|2]:COUPling AC|DC
4
a1.
:INPut[1|2]:ATTenuation 1
a2.
:INPut[1|2]:ATTenuation 10
5
:INPut[1|2]:FILTer ON | OFF
6
:INPut3:COUPling?
:INPut3:IMPedance?
__________________________
*
Note, in firmware revisions 3317, 3335 and 3402, use 0.
**
Note, in firmware revisions 3317, 3335 and 3402, use 100.
Figure 2-1. Input Channels Conditioning Keys to SCPI Command
Map (Part 2 of 2)
Summary of Contents for 53131A
