Honeywell Intermec CV41, User Manual

Page: 71 / 118

CV41 Vehicle Mount Computer (Windows CE) User Guide 63
Activate CDMA Communications
To activate the CDMA radio module in your computer, you need to contact your wireless
carrier and set up an account for each computer. The following table lists the carriers
that Honeywell currently supports. If your carrier is not listed in the table, please con-
tact Honeywell product support to see if it is now supported.
The carrier requires the Mobile Equipment Identifier (MEID) to start the activation pro-
cess. You can find the MEID:
• in the Gobi Connection Manager menu. Tap Start > Settings > Control Panel > Gobi
Connection Manager
>
CDMA
tab.
After you supply the MEID to your carrier, the carrier responds with values that you must
enter in the Gobi Connection Manager (if required). Your carrier sales contact and a
Honeywell representative can guide you through the process.
1. Press the Power button to place the CV41 in Suspend mode.
2. Connect an external WWAN antenna. For more information, see Connect an External
Antenna .
3. Press the
Power
button again to turn on the CV41.
4. Select Start > Programs > GobiCM > GobiCMExe .
5. In
Firmware Selection
, select your wireless carrier and click
Update Firmware
.
6. Select the CDMA tab, enter *22899 in the Activation Code field, and tap Save
Connection Data
.
7. Tap Activate .
8. Tap
Save Connection Data
.
About GPS
The GPS receiver in the CV41 delivers standards-based National Marine Electronics
Association (NMEA) data strings to GPS applications. To use the GPS receiver, you need
to:
• enable WWAN communications. For more information, see Use WWAN and GPS
Communications .
• install an external GPS antenna to the CV41. For more information, see Connect an
External Antenna .
For more information on purchasing an external GPS antenna, contact your Honeywell
representative.
Country Carriers
United States Verizon