Honeywell Intermec CV41, User Manual

Page: 61 / 118

CV41 Vehicle Mount Computer (Windows CE) User Guide 53
1. Make sure the communications and radio parameters on your computer are config-
ured.
2. Make sure Funk is selected as your security choice.
3. Start Intermec Settings.
4. Choose
Communications
>
802.11 Radio
>
Funk Security
.
5. Select the profile you want to configure.
6. For
Association
, choose
Open
.
7. For Encryption , choose WEP .
8. For
8021x
, choose
TTLS
,
PEAP
, or
TLS
.
9. If you chose TTLS or PEAP :
a. Enter a User Name .
b. For
Prompt for Credentials
, choose
Enter credentials now
.
c. Enter a User Password .
d. For
Validate Server Certificate
, choose
Yes
.
10. If you choose TLS :
a. Load a user and root certificate on your computer. For help, see Load a
Certificate .
b. For Validate Server Certificate , choose Yes .
c. Enter a
User Name
and
Subject Name
.
11. Save your settings.
Configure LEAP Security With Funk
After you configure the communications and radio parameters on your computer and
select Funk as your security choice, you can configure LEAP.
1. Start Intermec Settings.
2. Choose
Communications
>
802.11 Radio
>
Funk
.
3. Select the profile you want to configure.
4. For
8021x
, choose
LEAP
.
5. For Association , choose Open , WPA , WPA2 , or Network EAP . Encryption
automatically defaults to
TKIP
if you choose
WPA
,
AES
if you choose
WPA2
, and
WEP if you choose Open or Network EAP.
6. For
Prompt for Credentials
, choose
Enter credentials now
.
7. Enter a User Name and User Password .
8. Save your settings.
Configure Static WEP Security With Funk Security
Use the following procedure to configure static WEP security with Funk. Honeywell rec-
ommends that you use WPA2-PSK instead of WEP if possible.