Honeywell Intermec CV41, User Manual

Page: 60 / 118

52 CV41 Vehicle Mount Computer (Windows CE) User Guide
5. Select the profile you want to configure.
6. For Association , choose WPA or WPA2 . Encryption automatically defaults to TKIP
or
AES
, respectively.
7. For 8021x , choose TTLS , PEAP , EAP-FAST , or TLS .
8. If you choose
TTLS
,
EAP-FAST
, or
PEAP
:
a. For
Prompt for Credentials
, choose
Enter credentials now
.
b. Enter a User Name and User Password .
c. For
Validate Server Certificate
, choose
Yes
.
Note:
The correct date must be set on your computer when you enable
Validate Server
Certificate .
9. If you choose
TLS
:
a. Load a user and root certificate on your computer. For help, see Load a
Certificate .
b. Enter a
User Name
and
Subject Name
.
c. For Validate Server Certificate , choose Yes .
Configure WPA or WPA2 Personal (PSK) Security With Funk
Use the following procedure to configure WPA-PSK or WPA2-PSK with Funk security.
1. Make sure the communications and radio parameters on your computer are config-
ured.
2. Make sure Funk is selected as your security choice.
3. Start Intermec Settings.
4. Choose
Communications
>
802.11 Radio
>
Funk Security
.
5. Select the profile you want to configure.
6. For
Association
, choose
WPA
or
WPA2
.
7. For 8021x , choose None .
8. For
Pre-Shared Key
, enter the pre-shared key or passphrase.
The pre-shared key must be a value of 32 hex pairs preceded by 0x for a total of 66
characters. The value must match the key value on the access point. The passphrase
must be from 8 to 63 characters. After you enter a passphrase, the computer
internally converts it to a pre-shared key. This value must match the passphrase on
the authenticator.
9. Save your settings.
Configure 802.1x Security With Funk Security
Use the following procedure to configure 802.1x-WEP security with Funk security. Hon-
eywell recommends that you use WPA2-802.1x instead of 802.1x-WEP if possible.