Honeywell Intermec CV41, User Manual

Page: 65 / 118

CV41 Vehicle Mount Computer (Windows CE) User Guide 57
10. For
Network Key Setting
, choose
Automatic
.
11. Save your settings.
Configure Static WEP Security With Microsoft
Use the following procedure to configure static WEP security with Microsoft security.
Honeywell recommends that you use WPA2-PSK instead of WEP if possible.
1. Make sure the communications and radio parameters on your computer are config-
ured.
2. Start Intermec Settings.
3. Choose
Communications
>
802.11 Radio
>
Microsoft Security
.
4. For Network Authentication , choose Open .
5. For
Data Encryption
, choose
WEP
.
6. For Network Key Setting , choose Enter Key and Index .
7. For
Network Key Value
, enter an ASCII key or a hex key that is either 5 bytes or 13
bytes long depending on the capability of the radio.
Set a 5-byte value for 64-bit WEP or a 13-byte value for 128-bit WEP. Hex keys must
be preceded by 0x and contain 5 or 13 hex pairs.
8. For Network Key Index , select the key you want to use for data transmission.
9. Save your settings.
Use Open (No Security) Associations With Microsoft
Use the following procedure to configure your computer for open security using Micro-
soft WZC.
1. Start Intermec Settings.
2. Choose Communications > 802.11 Radio > Microsoft Security .
3. For
Network Authentication
, choose
Open
.
4. For Data Encryption , choose Disabled .
5. Tap
OK
. Your settings are saved.
Load a Certificate
To use transport layer security (TLS) with WPA or 802.1x security, you need a unique cli-
ent certificate on the computer and a trusted root certificate authority (CA) certificate.
Certificates are pieces of cryptographic data that guarantee a public key is associated
with a private key. They contain a public key and the entity name that owns the key. Each
certificate is issued by a certificate authority.
1. Start Intermec Settings.
2. Tap
Communications
>
802.11 Radio
>
Certificates
. The Certificates screen
appears.