Honeywell Intermec CV41, User Manual

Page: 54 / 118

46 CV41 Vehicle Mount Computer (Windows CE) User Guide
3. Select
Quick Connect
,
Search
, or
Manual
. Follow the onscreen instruction to add a
wireless scanner.
Connect to a Bluetooth Printer
To configure your computer for Bluetooth wireless printing, you need to:
• create an application that opens the wireless printing COM port on your computer.
For help, see the Bluetooth Resource Kit, which is part of the Intermec Developer
Library (IDL), available from
www’honeywellaidc.com .
• select the current wireless printer on your computer. For help, see the next procedure.
Note:
You can also print wirelessly using Microsoft APIs with Bluetooth extensions for Winsock
and Bluetooth virtual COM ports. For help, see the Bluetooth Resource Kit documentation.
1. Tap Start > Settings > Control Panel > Bluetooth Printing .
2. Tap
Search
to find a printer, or tap
Manual
to enter a device address. Follow the
onscreen instructions to select the current wireless printer.
3. (Optional) Tap
Print Test Page
. The printer prints out a test page.
About Serial and USB Communications
Use a serial or USB cable to transmit and receive data from another device through
serial or USB communications. If you are using a USB cable, you must purchase a USB
Y-Cable. For more information, contact your Honeywell representative.
Connect to a USB Scanner
When an HID-enabled USB scanner is used with the CV41, any data handling must be
programmed into the scanner because the data transmits to an active window as a key-
stroke message, and bypasses the Intermec Data Collection wedge. You can program
the scanner by:
• scanning the configuration bar codes from the scanner manufacturer.
• installing an application that accepts the incoming data.