Honeywell Intermec CV41, User Manual

Page: 58 / 118

50 CV41 Vehicle Mount Computer (Windows CE) User Guide
Create a VPN Server Connection
You can create a Virtual Private Network (VPN) connection to securely connect to serv-
ers, such as a corporate network, through the Internet. Before you can create a VPN
connection, you need this information from your network administrator:
• User name
• Password
• Domain name
• TCP/IP settings
• Host name or IP address of the VPN server
After you have located this information, you can create a VPN server connection.
1. Tap
Start
>
Settings
>
Control Panel
.
2. Double-tap Network and Dial-up Connections .
3. Double-tap
Make New Connection
.
4. Double-tap either Virtual Private Network (PPTP) or Virtual Private Network
(L2TP)
.
5. Step through the screens to set up your VPN connection.
About Wireless Security
The computer provides five types of security for your wireless network:
• Wi-Fi Protected Access 2 (WPA2™)
• Wi-Fi Protected Access (WPA)
• 802.1x
• LEAP
• WEP
This section explains how to configure wireless security on your computer. Honeywell
recommends that you implement WPA2 security using PSK (Personal) or 802.1X
(Enterprise) key management as appropriate.
You must use either Funk or Microsoft security to implement your security solution. For
details, see the next section,
Choose Between Microsoft and Funk Security Honeywell
recommends that you always implement WPA2 security using PSK (Personal) or 802.1X
(Enterprise) key management.
If you are using WPA-802.1x, WPA2-802.1x, or 802.1x security, this section also
assumes that your authentication server and authenticators are properly configured.
Note:
Your security choice does not depend on your authentication server. For example, you can
choose Funk security if you use Microsoft Active Directory® to issue certificates.