Honeywell HDVR, Reference Manual

Page: 97 / 238

HRDV Reference Guide
Rev 1.00 79 Document 900.0261
04/05
Setting Up Motion Zones
Use the Motion Zones screen to:
• Assign screen areas for up to four independent motion zones per camera
• Set individual sensitivities
• Set size of target (trigger size)
Testing the effectiveness of the motion triggers is key for optimal disk utilization.
When you use the motion detection function, a reference image is saved to provide a
background picture for motion detection. This reference image automatically updates at
regular intervals so that, for example, gradually changing light conditions will not trigger a
motion detection alarm. This reference update process is automated for optimal system
performance.
Access the Motion Zones screen as follows: MENU
➤
Event Recording
➤
Motion
Events
➤
Zone Setup . Figure 13-2 displays.
Figure 13-2 Zone Layout Screen per Camera
Actions Choose whether or not the HRDV16/8 should beep or trigger the Alarm Output
contact (to activate an external light, bell, and so on).
Record cameras Define which cameras (16 cameras for HRDV16, 8 cameras for HRDV8) will record
motion event video clips. These are stored in the event disk drive partition.
Zone Setup See Setting Up Motion Zones .
Field (Cont’d) Description
Motion Detection screen
When motion is detected, the
squares turn red.